TESWAY 48V/52V 60Ah Battery
Double Your Range — or Breathe New Life Into Your Tesway
If you’ve ever watched your battery gauge drop into single digits 30 kilometres from home, you already know the calculation: ride conservatively and limp back, or push hard and hope. A spare 60Ah battery eliminates that equation entirely. Swap packs at the halfway point, and your Tesway’s effective range doesn’t just increase — it doubles.
This is also the right move if your original pack is losing capacity after a few seasons of hard riding. Lithium cells degrade over charge cycles, and a battery that once delivered 80+ kilometres may eventually struggle past 50. Rather than replacing the entire bike, a fresh 60Ah pack restores full performance at a fraction of the cost.
Available in two configurations — 48V (2,880 Wh) and 52V (3,120 Wh) — this battery is purpose-built for Tesway’s high-power platform. The 52V variant delivers slightly higher voltage under load, which translates to better sustained torque on hills and at higher speeds. The 48V variant is the direct match for standard-voltage Tesway builds. Both share the same 60Ah capacity and the same physical form factor.
Battery Specifications
| Specification | 48V Variant | 52V Variant |
|---|---|---|
| Nominal Voltage | 48V | 52V |
| Capacity | 60 Ah | 60 Ah |
| Total Energy | 2,880 Wh | 3,120 Wh |
| Chemistry | Lithium-ion | Lithium-ion |
| Compatibility | Tesway X5 Pro, X7, RRO | Tesway X5 Pro, X7, RRO |
Key Features
- 60 Ah capacity — among the largest single-pack eBike batteries available in Canada, delivering up to 2,880 Wh (48V) or 3,120 Wh (52V) of usable energy
- Direct Tesway fitment — designed to mount and connect without modification on compatible Tesway models
- Dual-purpose use — carry as a spare for extended rides or install as a full replacement for an aging pack
- High-quality lithium cells — consistent discharge curve maintains power delivery as the pack drains, avoiding the voltage sag that plagues lower-quality cells
- Standard Tesway connector — plug-and-ride with no wiring or adapter needed
Compatibility
This battery is designed for the following Tesway eBikes available at Zeus eBikes Canada:
- TESWAY X9 AWD 4000W — confirm voltage variant before ordering
- Tesway X7 AWD Dual Motor
- TESWAY X5 AWD Dual Motor Step-Thru
- TESWAY X7 PRO Foldable Fat Tire
The battery is specifically listed as compatible with the X5 Pro, X7, and RRO platforms. If you ride a different Tesway model, reach out to our team to confirm fitment before purchasing.
What’s Included
- 1 × TESWAY 60Ah Battery (48V or 52V variant as selected)
- Battery key set
- Mounting hardware
Frequently Asked Questions
How long does the 60Ah battery take to charge from empty?
A full charge from zero to 100% typically takes 8–12 hours using the standard Tesway charger. We recommend charging overnight. If you need faster turnaround, consider a higher-amperage charger compatible with your bike’s charging port — but always confirm compatibility before using a third-party charger to avoid damaging the cells.
Can I use this battery to extend my range by carrying a spare?
Yes. This is one of the primary use cases. Ride on your original battery, then swap to the 60Ah pack when it depletes. On a 48V system, two 60Ah packs give you a combined 5,760 Wh — enough for well over 150 km under normal riding conditions. Carry the spare in a rack bag or panniers and swap in under two minutes at a rest stop.
Is the 48V version compatible with a 52V bike, or vice versa?
No. You must order the variant that matches your bike’s electrical system. Running a 52V battery on a 48V controller can overvolt the system and cause permanent damage. Running a 48V battery on a 52V system will result in reduced performance and potential error codes. When in doubt, check your existing battery’s label or contact us.
How should I store the battery when not in use?
Store the battery in a cool, dry location between 10°C and 25°C. Charge it to approximately 60–70% before long-term storage — never store a lithium battery fully charged or fully depleted. Check the charge level every 2–3 months during the off-season and top it up to 60% if it’s dropped significantly. Avoid storing in unheated garages during Canadian winters, as prolonged sub-zero temperatures can reduce cell lifespan.
How do I know when my original battery needs replacing?
The clearest sign is reduced range. If your bike used to cover 80 km on a charge and now struggles past 50 km with the same riding style and conditions, the cells have degraded. Other indicators include the battery gauge dropping unusually fast under load, longer charging times, or the battery failing to hold its charge when the bike sits unused for a few days. Most lithium eBike batteries deliver strong performance for 800–1,200 full charge cycles before noticeable degradation.
Extend Your Warranty Protection
All Zeus Ebikes come with a free 1-month limited warranty through Zeus, followed by standard manufacturer coverage (typically 1–2 years). For added peace of mind, you can choose a Zeus Extended Warranty plan below for continued direct support, remote diagnostics, and claim handling — up to 5 years.
TESWAY 48V/52V 60Ah Battery
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
Free Shipping Canada Wide
Exceptional Service
At Zeus Ebikes, we go beyond just selling ebikes. We're dedicated to offering the best customer service and support to ensure you're fully satisfied. Your happiness is our priority, and we're here to make your experience as smooth as your ride.
Blog posts
